Ethos 1.5 Series User Manual

Ethos v1.5.7 and X18, X20 series User Manual
x > 0
If the source value is positive, then the curve output follows the source.
If the source value is negative, then the curve output is 0.
Offset
Note that all curves can have a positive or negative offset which will shift the curve
upwards or downwards on the Y axis.
x < 0
If the source value is negative, then the curve output follows the source.
If the source value is positive, then the curve output is 0.
265 rev 2

Ethos 1.5 Series Specifications

General

Brand	Ethos
Model	1.5 Series
Category	Remote Control
Language	English