Ethos v1.5.7 and X18, X20 series User Manual
h) a timer
i) a telemetry sensor
j) a system value (e.g. main radio voltage or RTC battery voltage)
k) a ‘special’ value, i.e. minimum, maximum or 0
The mix will take the value of the source at any instant as its input.
Operation
The Operation type defines how the current mix interacts with the others on the
same channel. There are three function types:
Addition
The output of this mix will be added to any other mixes on the same output
channel. Please note that Addition mixes can be in any order (A+B+C =
C+B+A).
Multiply
The output of this mix will be multiplied with the result of other mixes above it
on the same output channel.
Replace
The output of this mix will replace the result of any other mixes on the same
output channel.
Lock
A channel which is "locked" will never be changed by any other mix while the
locked mix is active. (This is a good alternative to the Override function of
OpenTX.)
The combination of these operations allows the creation of complex
mathematical operations.
Actions
The free mix is extremely flexible in that up to 50 mix actions can be defined.
To Next Page
Loading...
Need help?
General