MAINTENANCE MANUAL
Effectivity: All
Page 05-13
Issue 2 | Rev. 1
SCHEDULED INSPECTION AFTER 100 FH OR ANNUAL INSPECTION
Page: 3 of 12
Ref. Prescribed works Made by Checked by
28-20 Check hoses and tubes for condition, integrity,
attachment and security; replace damaged hoses.
28-20 Check fuel system for leaks.
Cooling system
75-00 Check water cooler for condition and leaks.
75-00
79-20
Check hoses and tubes for condition, attachment,
leaks and security. Cooler left hose clearance from
exhaust pipe approx. 20 mm.
75-00 Check and tighten hose clamps as required.
12-10 Check coolant quantity in the expansion tank; add or
change coolant as required.
75-00 Check overflow bottle for condition and attachment.
Oil system
79-10 Check oil tank for condition and attachment.
79-20 Check oil cooler for condition, attachment and leaks.
79-20 Check hoses for condition, leaks, attachment and
security; replace damaged hoses.
12-10 Check oil quantity; add or change oil as required.
Exhaust system
78-10 Check exhaust pipes for condition, cracks,
deformations or damage; as required repair or
replace.
78-20
21-40
Check muffler and heat exchanger for condition,
cracks, deformations or damage; repair or replace as
required.
78-10
78-20
Check exhaust system fasteners for security.
Notes:
Date: ........................................ Signature: ........................................