XTP CrossPoint Series • HTML Operation 128
Date/Time Settings panel
The Date/Time Settings panel (see figure 60) provides a location for viewing and setting
the time functions.
Figure 60. Date/Time Settings Panel
Change the date and time settings as follows:
1. Click the drop-down list for the desired value (see figure 60,
1
). The adjustable
variables are month, day, year, hours, minutes, AM/PM, and (time) zone. A drop-down
list appears (the year list is selected in figure 60).
2. If necessary, click and drag the slider or click the scroll up button or the
scroll down button until the desired value is visible.
3. Click the desired value (
2
).
NOTES:
• If setting the time, set the local time. The Zone drop-down list allows you to
then enter the offset from Greenwich Mean Time (GMT).
• The Zone drop-down list identifies the standard time zone selected and
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. If appropriate, select the appropriate Daylight Savings radio button (
3
) to turn on
the daylight savings time feature for your region or nation.
NOTE: When Daylight Savings is turned on, the matrix switcher automatically
updates its internal clock between Standard Time and Daylight Savings Time in
the spring and fall on the date that the time change occurs in the country or region
selected. When Daylight Savings is turned off, the matrix switcher does not
adjust its time reference.
6. Click the Submit button (
4
).
To Next Page
Loading...
