Extron electronics XTP CrossPoint1600 - Page 141

XTP CrossPoint Series • HTML Operation 133
2. Click the Firmware link (see figure 64,
2
on the previous page).
3. Select the desired firmware file to download and click Download (
3
).
TIP: Click the desired Filter By: letter to jump to the correct page of downloads.
4. Enter the requested personal information (
4
).
TIP: Click Remember Me to eliminate step 4 in future downloads.
5. Click Download to copy the software or firmware to your computer (
5
).
6. Click Run to confirm that you want to run the installation (
6
).
7. Click Run twice (see figure 65,
1
on the next page). The PC downloads the firmware
update from the Extron Website and starts the Extron Installation Program to extract the
firmware file.
8. Click Next (
2
). The program extracts the firmware files and places them in a folder
identified in the InstallShield Wizard window. Note the folder to which the firmware file is
saved.
9. Click Finish to exit the program (
3
).
10. Connect the PC to the XTP CrossPoint Series matrix switcher via the LAN port of the
matrix switcher.
11. Access the XTP CrossPoint Series matrix switcher using HTML pages (see Download
the Startup Page on page 122).