XTP CrossPoint Series • Introduction 9
• Automatic cable equalization for each digital input to 100 feet (30 m) when
used with Extron HDMI or DVI Pro cables — Cable input equalization optimizes
signal performance for all incoming signals, ensuring pristine image quality is delivered
throughout an XTP CrossPoint System.
• Automatic output reclocking — Reshapes and restores timing of digital video signals
at each output, eliminating high frequency jitter to ensure reliable transmission over long
cables.
• Audio input gain and attenuation — Allows the level of gain or attenuation to be set,
eliminating noticeable volume differences when switching between sources.
• Audio output volume adjustment and muting — Audio output can be set
dynamically for each channel through the front panel or serial control eliminating the
need for audio preamplifiers in many system designs.
• Ethernet monitoring and control — Engineered to meet the needs of professional AV
environments, Ethernet control provides proactive monitoring and system management
over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control
provides for remote selection of input and output ties, adjustment and control of audio
input and output levels, and advanced system diagnostics.
• Tri-color, backlit buttons — Buttons can be custom labeled for easy identification.
The buttons illuminate red, green, or amber, depending on function, for ease of use in
low-light environments.
• QuickSwitch Front Panel Controller (QS-FPC) — Provides a discrete button for
each input and output, allowing for simple, intuitive operation.
• Global presets — Frequently used I/O configurations may be saved and recalled either
from the front panel, serial, or Ethernet control. This time-saving feature allows I/O
configurations to be set up and stored in memory for future use.
• View I/O mode — Users can easily view which inputs and outputs are actively
connected.
• Front panel configuration port — Enables easy configuration without having to
access rear panel of the matrix switcher.
• Front panel security lockout — Prevents unauthorized use in non-secure
environments. In Lock mode, a special button combination is required to operate the
matrix switcher from the front panel controller.
• Optional remote control — The optional MKP 2000 and MKP 3000 X-Y Remote
Control Panels provide the flexibility to control the matrix switcher from a remote
location.
• JITC Certified — Successfully completed interoperability and information assurance
testing for use in government applications and other mission-critical environments.
• Rack-mountable 5U (XTP CrossPoint 1600) or 10U (XTP CrossPoint 3200) full rack
width metal enclosure.
To Next Page
Loading...
