RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2) 5
POSITIVE / NEGATIVE value., 6-93
Potentiometer, 14-14
Power Port, 2-8
power/data cables, 4-36
Premium Resin Black (K), 2-10
prevents magnetic encoding, 6-42
Print All Black With K Panel, 6-76
print and overlay, 6-50
Print Back Side First option, 6-23
Print back side only, 6-24
print both sides, 6-21, 6-22
Print Both Sides option, 2-14, 6-22, 6-24
Print Drive Stepper, 9-2
Print Driver, 14-14
Print Job, 14-14
Print K Only options, 6-87, 6-89, 6-90, 6-95, 6-97, 6-98,
6-101
Print Length option, 6-94
Print Method, 2-3
Print Ribbons, 2-9
Print Server, 14-14
print the first page of a two-page document, 6-23
Print YMC Under K option, 6-87
printable area, 6-31
Printed cards
dark or light, 4-43
printed image diagram, 6-33
Printer Cleaning Kit, 7-4
Printer Driver setup screen, 6-38
Printer Drivers, 2-3
Printer's Front Cover, 7-4, 7-5
Printer's memory, 6-31
Printhead, 2-8, 14-15
Printhead Cleaning Swabs, 7-2
Printhead power cable, 4-36
printing supplies, 7-5
Prox Card Encoder, 14-15
Proximity cards, 2-13
PVC, 14-15
PVC laminate, 2-13
Q
Queue, 14-15
R
RAM (Random Access Memory), 14-15
Rasterize, 14-15
Reboot, 14-15
Registration, 14-15
Regulatory Compliances, 2-1
Reject Hopper, 4-15
Reset Printer, 4-36
Resident Font, 14-15
Resin, 14-15
resin black (K) panel, 6-76, 6-77, 6-87
Resin Black Panel, 2-9
resin dither, 6-20
Resin Heat slide, 6-28, 6-29
Resin Thermal Transfer, 2-7
Resolution, 2-4, 14-16
RFI (Radio Frequency Interference), 14-16
RGB (Red/Green/Blue), 14-16
Ribbon, 14-16
Ribbon / Cards, 1-2, 6-4, 7-1, 9-1
Ribbon cable, 14-16
ribbon Panels, 6-22
Ribbon Sensor Calibration, 4-54
Ribbon Type option, 6-15
Ribbon wrinkle problems, 4-46
RibbonTraq, 14-16
RMA number, 14-16
Roller, 14-16
Roller Up/Down Error, 4-33
Rotate Front 180 Degrees option, 6-61, 6-82
rotate front by 180 Degrees, 6-25
rotates image, 6-25
RS-232, 14-16
S
safety issues, 1-2, 4-3, 6-4, 7-1, 9-1, 11-2
Safety Standards, 2-2
Saturation, 14-16
second K Panel, 6-22
Selecting Orientation - Landscape under Card tab, 6-64
Selecting Orientation – Portfolio under Card tab, 6-66
Selecting the number of copies, 6-8
Selecting the Visual Security Solutions, 6-67, 6-68, 6-69
Selecting the Visual Security Solutions dropdown menu,
6-65
Self-test, 4-54, 4-55, 14-17
Sending data to Track 1, 6-48
Sensor, 14-17
Sensors button, 6-34
Serial interface, 14-17
Settings button, 4-51, 4-52
Shift Data Left checkbox, 6-45
Shift Data Left option, 6-45
SIMM, 14-17
Simplex, 14-17
Smart Card, 14-17
SmartGuard, 14-17
SmartShield™, 14-17
Software, 14-17
special precautions, 1-2, 6-4, 7-1, 9-1
Split 1 Ribbon Panels, 6-22
Spooler, 14-17
Spooling, 14-18
SS (Start Sentinel), 14-18
Stacker, 14-18
Standard Resin Black (K), 2-10
Standard Self-test (YMC), 4-54
Start Sentinel (SS), 6-47
Stepper Motor, 14-18
String, 14-18
Supply Frequency, 2-4
Supply Voltage, 2-4
Surface mount, 14-18
Switch box, 14-18
System Requirements, 2-4
To Next Page
Loading...
