Fargo DTC400 - Page 5

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
v
Configuring the Network Settings______________________________________________________ 5-18
Accessing the Network Settings page_________________________________________________ 5-18
Reviewing the Interface ___________________________________________________________ 5-19
Reviewing the Current Settings _____________________________________________________ 5-19
Switching to the automatic IP address mode ___________________________________________ 5-20
Changing to the static IP address mode _______________________________________________ 5-21
Entering the TCP Window Size _____________________________________________________ 5-23
Using the Clear Changes button _____________________________________________________ 5-24
Using the Ribbon Information page ____________________________________________________ 5-25
Using the TCP/IP page ______________________________________________________________ 5-26
Using the TCP/IP Status Web Page __________________________________________________ 5-27
Using the Printer page_______________________________________________________________ 5-28
Using the System Log page___________________________________________________________ 5-30
Changing the Log Name___________________________________________________________ 5-31
Selecting the Log Type____________________________________________________________ 5-33
Selecting the Log Destination_______________________________________________________ 5-34
Setting up Email Event logging _____________________________________________________ 5-35
Specifying UDP Event logging _____________________________________________________ 5-36
Specifying TCP Event logging ______________________________________________________ 5-37
Using the Administration pages _______________________________________________________ 5-39
Using the System Information page __________________________________________________ 5-39
Changing the Root Password _______________________________________________________ 5-41
Upgrading the Print Server_________________________________________________________ 5-43
Using the Reboot pages______________________________________________________________ 5-45
Rebooting the Ethernet Server ______________________________________________________ 5-45
Resetting to Default Settings _______________________________________________________ 5-47
Using the Help page ________________________________________________________________ 5-48
Additional Procedures ________________________________________________________5-49
Reviewing LED and Dipswitch Tables __________________________________________________ 5-49
Reviewing the LED Table _________________________________________________________ 5-49
Reviewing the Dip Switches________________________________________________________ 5-50
Restoring the Factory Settings for Ethernet ______________________________________________ 5-51
Restoring the Default Settings ______________________________________________________ 5-51
Accessing the IP address of your Printer_________________________________________________ 5-52
Accessing the DTC400 IP address ___________________________________________________ 5-52
Upgrading the Main Firmware with the Fargo Diagnostics Utility_____________________________ 5-53
Ethernet Printer Troubleshooting Procedures_____________________________________5-55
Troubleshooting procedures ________________________________________________________ 5-55
Verifying the Printer Connection ____________________________________________________ 5-56
Verifying the Printer IP address _____________________________________________________ 5-56
Verifying that your PC can access the Printer using the ping command ______________________ 5-57
Printing a test page _______________________________________________________________ 5-58
Reviewing Frequently-asked Questions __________________________________________5-59
Glossary of Terms ____________________________________________________________5-65
Section 6: Printer Adjustments_______________________________________________6-1
Table of Contents ___________________________________________________________________ 6-1
Safety Messages (review carefully)______________________________________________________ 6-4
DTC400 Print Driver Options __________________________________________________________ 6-5
Reviewing DTC400 Printer Drivers ___________________________________________________ 6-5
Using the Card tab (DTC400) __________________________________________________________ 6-6
Adjusting the Card Size Option ______________________________________________________ 6-6
Adjusting the Orientation Option _____________________________________________________ 6-7
Selecting the number of copies_______________________________________________________ 6-8