FARO
®
Laser Scanner Manual
74
Chapter 7: Controller Software
through the SD card. Read the SCENE user manual for more information on
this.
Figure 7-17: Projects List
This view shows a list of all created scan projects/clusters.
The Default_Project is a standard project that can be selected when working
in no particular scan project. The Default_Project is not deletable and you can
not change its name or parent project.
NOTE: Every project and cluster gets a unique internal
identification number when it is created. Combining the scans to
scan clusters during post processing in SCENE will be done
according to this identification number and not on the basis of the
project name. This is particularly relevant when working with
several scanners on the same scan project. In this case, you must
create the project structure once as a master and then transfer it to
all of your scanners. Thus, it is not recommended to create or edit
a project of the same scan project separately on each scanner.
Even if the separately created projects and clusters have the same
name, they will get different identification numbers and will be
treated as different projects by SCENE.
To Next Page
Loading...
