Faro Focus M 70 - Page 79

FARO
®
Laser Scanner Manual
79
Chapter 7: Controller Software
only and cannot be changed or deleted. But you can of course add and
manage your own custom scan profiles.
This view shows all scan profiles that are available on the scanner.
To add a new profile, tap the
Add button. You can also add new profiles by
duplicating existing profiles. To do this, select the profile that you want to
duplicate and tap the
Duplicate button. Tap again on the profile. A new screen
appears to enter the profile name and to adjust its scan parameters.
To delete a custom scan profile, select it and tap the
Delete button. You cannot
delete factory predefined profiles.
Figure 7-22: Scan Profile Details
Profile Name: name of the scan profile. Tap to change it.
The further settings in this view are similar to the settings of the scanning
parameters. For more information, see Scan parameters on page 64.
Editing a Scan Profile
To edit a scan profile, select it in the list and tap it again to view its details. You
cannot edit predefined profiles.
To view the details of the selected profile, tap once again.