FARO
®
Laser Scanner Manual
97
Chapter 7: Controller Software
Network Name
The name of the wireless network. Tap it to enter a screen where the available
networks are displayed and can be selected.
IP settings
Set a static IP Address or obtain one automatically through DHCP.
The IP settings determine whether an IP address is assigned by a server
using DHCP or set manually (“Static”):
• DHCP: This is the default/recommended setting.
• Static: The IP address is assigned manually. The following settings have to
be provided.
IP Address
The IP address of the scanner. A unique IP address must be preset on the
WLAN network. If your remote device is connected to the scanner, enter this
address into the address field of your web browser (for example,
http://172.17.16.23) to access the controller software. Tap to change the
scanner’s IP address.
Figure 7-37: Connection to Scanner Interface through web browser
If you prefer secured, encrypted communication with the scanner GUI, enable
the secure connection https://172.17.16.23 in the address field of your web
To Next Page
Loading...
