Fibocom L860-GL - Page 148

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 148 of 254
Command Description
Set [Function]
Set command is used to set the Rat.
[Syntax]
AT+WS46=[<n>]
[Response/Action]
OK
or:
+CME ERROR: <err>
Read [Function]
Read Command reads the current RAT.
[Syntax]
AT+WS46?
[Response/Action]
+WS46: (Current value of <n>)
OK
Test [Function]
Test command returns the list of supported RATs.
[Syntax]
AT+WS46=?
[Response/Action]
+WS46: (list of supported <n>s)
OK
Parameters <n>:Integer type
<n> value of set command
12 3GPP System (GERAN, UTRAN and E-UTRAN) for triple mode stack. Preferred
Network
selection will be based on the highest network generation, in the order of E-UTRAN, UT
RAN and GERAN.