Fibocom L860-GL - Page 168

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 168 of 254
Command
Description
+XMCI:
<TYPE>,<sector_id>,<pilot_pn>,<base_lat>,<base_long>,<gps_sec>,<gps_week>
OK
Read N/A
Test [Function]
Test command returns list of supported Measurement type.
[Syntax]
AT+ XMCI =?
[Response/Action]
+ XMCI: (list of supported <meas>s)
OK
Parameters <meas>: Integer type.
Measurement type.
0 All available information regarding measured cells (Serving, IntraRAT and
Inter-RAT neighboring Cells (default)
1 Fresh Serving Cell Measurements and All available information regarding
measured neighboring cells ( Intra-RAT, Inter-RAT)
<TYPE>: Integer type.
Type of cell.
0 GSM serving cell
1 GSM neighboring cell
2 UMTS serving cell
3 UMTS neighboring cell
4 LTE Serving Cell
5 LTE Neighboring cell
6 1xRTT Serving Cell
7 1xRTT Neighboring cell
8 EvDO Serving Cell
9 EvDO Neighboring cell
Example AT+ XMCI=1
+XMCI: