Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 3 of 254
Copyright
Copyright ©2019 Fibocom Wireless Inc . All rights reserved.
Without the prior written permission of the copyright holder, any company or individual is prohibited to
excerpt, copy any part of or the entire document, or transmit the document in any form.
Attention
The document is subject to update from time to time owing to the product version upgrade or other
reasons. Unless otherwise specified, the document only serves as the user guide. All the statements,
information and suggestions contained in the document do not constitute any explicit or implicit
guarantee.
Trademark
The trademark is registered and owned by Fibocom Wireless Inc.
Versions
Version Author Date Remarks
V3.2.1 2018-05-04 Initial version
V3.2.2 2019-3-5
1. Delete commands not supported by L860：+TPIN、
+MSMPD、+MGAUTH、+SMMFULL、+GPIO
2. Add commands to customers：+XMCI、+XCCINFO、
+XGAUTH、+XLEC、+XAUTH、+XCESQ、+XCESQRC、
+XDATACHANNEL、+XDNS、+XSYSTRACE、
+XADPCLKFREQINFO
3. Delete unsupported functions：AT+CIMI? AT+CNUM?
4. Modify the description of the cid scope：according to 3GPP
protocol 27007 and L860 code，pdp context cid scope is:
[0~29]，not [1~20]
5. Modify the description of the +CSCON command
Parameters
6. Modify the description of the +CGTFT command
Parameters, AT+CGTFT=? It actually returns 12
To Next Page
Loading...
