Fibocom L860-GL - Page 36

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 36 of 254
Command Description
Set [Function]
The Set command is allowed for read/write S-registers, and not allowed for read-only
S-registers.
[Syntax]
ATSn=<value>
[Response/Action]
OK
or:
+CME ERROR: <err>
Read [Function]
[Syntax]
ATSn?
[Response/Action]
<current value of S-register n>
OK
or:
+CME ERROR: <err>
Test N/A
Parameters
Sn
Description
Min Value
Max Value
Default Value
S0
Sets/gets number of rings before
auto answer.
0 255 0
Example ATS0?
000
OK
ATS0=128
OK
ATS0?
128