Fibocom L860-GL - Page 49

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 49 of 254
The parameter will be saved in NVM and can restore at power cycle.
Command Description
Set [Function]
Enable/Disable SIM card hot plug
[Syntax]
AT+MSMPD=< status>
[Response/Action]
OK
Or:
+CME ERROR: <err>
Read [Function]
Read the current status
[Syntax]
AT+MSMPD?
[Response/Action]
+MSMPD: <status>
OK
Test [Function]
Return the list of supported value.
[Syntax]
AT+MSMPD=?
[Response/Action]
+MSMPD: <list of supported status>
OK
Parameters <status>
0: Disable the SIM card hot plug feature
1: Enable the SIM card hot plug feature
The default value is 1
Example AT+MSMPD=?
+MSMPD: (0,1)