Fibocom L860-GL - Page 61

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 61 of 254
Command Description
[Response/Action]
+CMEE: <n>
OK
Test [Function]
The Test command returns values supported by the terminal as a compound value.
[Syntax]
AT+CMEE=?
[Response/Action]
+CMEE: (list of supported <n>s)
OK
Parameters <n>
0 Disable the +CME ERROR: <err> result code and use ERROR.
1 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and use
numeric <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
2 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and use
verbose <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
The default value is 0.
Example AT+CMEE=0 //+CME ERROR is not used
OK
AT+VTD
ERROR
AT+CMEE=1 //Use numeric <err>
OK
AT+VTD
+CME ERROR: 1
AT+CMEE=2 //Use verbose <err>
OK
AT+VTD
+CME ERROR: operation not supported