Fibocom L860-GL - Page 83

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 83 of 254
Command Description
This command returns the current values.
[Syntax]
AT+CNMI?
[Response/Action]
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Test [Function]
This command returns the list of supported values.
[Syntax]
AT+CNMI=?
[Response/Action]
+CNMI: (list of supported <mode>s), (list of supported <mt>s), (list of supported
<bm>s), (list of supported <ds>s), (list of supported <bfr>s)
OK
Parameters <mode>
0 Buffer unsolicited result codes in the TA; if the TA buffer is full, the oldest
indication may b
e discarded and replaced with the new received indications (ring
buffer).
1 Discard indication and reject new received message unsolicited result codes
when TA-TE link is reserved; otherwise forward them directly to the terminal.
2 Buffer unsolicited result codes in the TA when the serial link is busy (e.g.
data-transfer); otherwise forward them directly to the terminal.
<mt>
0 No SMS-DELIVER indications are routed to the terminal (default)
1 If SMS-DELIVER is stored in the Modem, the memory location indication is
routed to the terminal using the unsolicited result code: +CMTI: <mem>,<index>
2 SMS-DELIVER (except class2 SMS) are routed directly to the TE using the
unsolicited result code:
+CMT: [<alpha],<length><CR><LF><pdu> (in PDU mode)