Fidelity Electronics A10 - Page 21

21
F20
Keyboard Lock
** Off (Disable)
On (Enable)
When keyboard lock is = On, only [Zero], [Tare], [Set] & [On/Off] keys are accessible during operation status.
F21
Weigh & ATM Mode
Lab 2 Output Print
Format
** STD
CUSTOM
F22
Piece Count Mode
Lab 2 Output Print
Format
** STD
CUSTOM
F24
Animal Weighing
Mode Lab 2 Output
Print Format
** STD
CUSTOM
F25
Check Mode
Mode 0
** Mode 1
• Mode 0 = Static Check Mode (only stable weight results are checked). If selected, input also the delay time interval.
• Delay time interval is the time value (in second) from when a stable result is detected, and before the corresponding check result
signal/output is triggered.
• Mode 1 = Standard/Dynamic Check Mode (real-time check result is given disregarding weight results are stable or not). If Mode 1 is used
for dynamic application, set also F26.
F26
Near Zero Value
** 000000
Near Zero value is used for dynamic weight check applications to bypass unnecessary Lo signals during uploading and unloading process.
Notes: -
• Value inputted valid only when Check function is activated.
• No check results will be given to weight results which is less than the near zero value.
• Near zero weight value can be any value between 20d and Lo limi
• Any near zero value which less than 20d will be ignored. Instrument deems 20d as minimum near zero weight value.
F28
Ask for Operator
Number when Power
On
Yes
** No