FT-50 Fill Level Inspector Service Manual
5-14
Learn Target Head Height
Precisely determines the optimum inspection head height for the
container’s fill level by leading you through a series of mechanical
adjustments. This function is part of the Fill Level Optimization
routine. See Chapter 6: Fill Level Optimization for more
information.
Dyn. Reject Pt. Test
See Chapter 6: Fill Level Optimization for more information.
Dyn Prod. Good Test
See Chapter 6: Fill Level Optimization for more information.
Review Fill Level Test
Allows you to review all settings that were determined during the
Fill Level Optimization routine. See Chapter 6: Fill Level Optimi-
zation for more information.
Industrial Dynamics Company, Ltd. Document 40255-0600
To Next Page
Loading...