Filtec FT-50c - Reset Total Rejects; Reset Total Underfill; Reset Total Overfill; Reset Total Missing Lid

Chapter 5: System Software
5-19
Reset Total Rejects
Clears and resets the Total Rejects counter to zero. Record all
valuable data before executing this function.
To reset the Total Rejects:
1. Press Key 3 until RESET TOTAL REJECTS appears.
2. Press the Arrow Key to execute.
Reset Total Underfill
Clears and resets the Total Underfill counter to zero. Record all
valuable data before executing this function.
To reset the Total Underfill:
1. Press Key 3 until RESET UNDERFILL appears.
2. Press the Arrow Key to execute.
Reset Total Overfill
Clears and resets the Total Overfill counter to zero. Record all
valuable data before executing this function.
To reset the Total Overfill:
1. Press Key 3 until RESET OVERFILL appears.
2. Press the Arrow Key to execute.
Reset Total Missing Lid
Clears and resets the Total Missing Lid counter to zero. Record all
valuable data before executing this function.
To reset the Total Missing Lid:
1. Press Key 3 until RESET MISSING LID appears.
2. Press the Arrow Key to execute.
Industrial Dynamics Company, Ltd. Document 40255-0600