Chapter 2: Installation Requirements
2-5
• Use either plastic or stainless steel chain, however do not use
flex chain within the inspection and rejection area.
• IDC recommends that you select and install a backup sensor
downstream from the rejector. This sensor detects container
backup and will shut down the line before the backup accumu-
lates into the rejector area which can damage the equipment.
Reject Takeaway Conveyor
The requirements for the reject takeaway conveyor are determined
by the model of rejector you are installing. Refer to the rejector
manual that is included with your machine for specifications.
Industrial Dynamics Company, Ltd. Document 40255-0600
To Next Page
Loading...