Chapter 8: Diagnostic and Repair Procedures
8-13
Troubleshooting Procedures
The troubleshooting procedures in this section are designed to
help you isolate machine malfunctions and determine the proper
corrective action. Once you determine the problem source, you
will be directed to the appropriate corrective procedures that are
contained in other sections of this manual.
Major Component Subsystems
System failures fall into one or more of the following subsystem
categories:
Power Supply System:
• Main Power Supply
• Power Transformer
Processing System:
• Main Processor Card
• Serial Communications Card
• Control Panel
Sensor System:
• Scintillation Tube or Solid State Detector (SSD)
• Optical Sensors: Inspection Triggers, Missing Lid, Bulged End,
Down Can
• Proximity Sensor: Missing Lid
• Encoder
Rejector Systems
• Proline Rejector
Before You Begin
Before you attempt any diagnostic or troubleshooting procedure:
• Read and understand the procedure(s) thoroughly.
• Understand and comply with all safety precautions.
• Have the proper diagnostic equipment on-hand.
Industrial Dynamics Company, Ltd. Document 40255-0600
To Next Page
Loading...