Filtec FT-50c - Reset Total Bulged End; Reset Total down Can; Reset Total Diameter Missing Lid; Reset Total External Rejects

FT-50 Fill Level Inspector Service Manual
5-20
Reset Total Bulged End
Clears and resets the Total Bulged End counter to zero. Record all
valuable data before executing this function.
To reset the Total Bulged End:
1. Press Key 3 until RESET BULGED END appears.
2. Press the Arrow Key to execute.
Reset Total Down Can
Clears and resets the Total Down Can counter to zero. Record all
valuable data before executing this function.
To reset the Total Down Can:
1. Press Key 3 until RESET DOWN CAN appears.
2. Press the Arrow Key to execute.
Reset Total Diameter Missing Lid
Clears and resets the Total Diameter Missing Lid counter to zero.
Record all valuable data before executing this function.
To reset the Total Diameter Missing Lid:
1. Press Key 3 until RESET DIAMETER MISSING LID appears.
2. Press the Arrow Key to execute.
Reset Total External Rejects
Clears and resets the Total External Rejects counter to zero. Record
all valuable data before executing this function.
To reset the Total External Rejects:
1. Press Key 3 until RESET TOTAL EXTERNAL REJECTS
appears.
2. Press the Arrow Key to execute.
Industrial Dynamics Company, Ltd. Document 40255-0600