97
DMP30 / DMP40 Service
Finish continuous count rate recording: STOP
TH
Switches to coating thickness display in the count rate Measurement view
(unit of measurement set as in the open batch)
XN
Switches to count rate display in the count rate Measurement display
3. Exit the menu: , the settings are now made.
15.2 Gauge cleaning
Switch off the gauge before cleaning it!
Cleaning the gauge
► Simply wipe away normal soiling, such as dust, with a damp cloth.
► Wipe away oily deposits with a dry cloth and then clean the spots with plastic
cleaner or household detergent.
► Remove paint and lacquer using a solvent. Use solvents such as acetone,
methyl ethyl ketone, turpentine oil, or xylene to clean the gauge.
ATTENTION – Damage to the gauge/probe
Do not clean the gauge/probe under running water!
IP64 ≠ water-proof, gauges in protection class IP64 are resistant only to
splash water. They are not waterproof and cannot withstand constant water
pressure!
Scratches on the display
Cleaning the display with a dry cloth can scratch the display.
To Next Page
Loading...
