90
Gauge settings DMP30 / DMP40
14 Gauge settings
The display language, date, and time, for example, are general gauge settings and
apply to all batches.
In addition to the general gauge settings, you can also retrieve information about the
gauge software, copyright, etc. from the Gauge Settings menu.
14.1 Setting the language
You can set the display language for the gauge.
To select the language
1. >
Gauge Settings
> OK > Language > OK > select desired language > OK
Parameter is activated:
2. Exit the menu: , the language has now been set.
14.2 Display settings
You can activate and deactivate the automatic flip display view according to the
gauge position, and also adjust the display brightness.
To change the display settings
1. >
Gauge Settings
> OK > Display Settings > OK
• Activate/deactivate flip function for the display: Flip Display > OK.
Parameter is activated:
• Set display brightness: Brightness > OK > set desired brightness value > OK
2. Exit the menu: , the settings are now made.
[ ]
[ ]
To Next Page
Loading...
