92
Gauge settings DMP30 / DMP40
14.4 Energy saving
To prolong the battery life as far as possible, the gauge offers automatic shutdown
and display dimming as energy-saving functions.
To change the shutdown and dimming times, and also the dimming
strength
1. >
Gauge Settings
> OK > Energy Savings > OK
2. Select the desired function: > OK.
3. Set the desired time value/dimming strength: > OK
Shutdown time 0 min: Function deactivated, there is no automatic gauge
switch-off or display dimming
max. shutdown time: 1000 min.
4. Repeat steps 2. and 3. for more menu settings.
5. Exit the menu: , the settings are now made.
Description of the energy-saving functions
Switch off after
Automatic gauge shutdown after a preset period of time without any action (key
confirmation or measured reading acquisition)
Switch off (USB)
Automatic gauge shutdown after a preset period of time without any data
transfer via USB interface
Dim display after
The display brightness is automatically dimmed to the specified brightness val-
ue (Dimming Ratio) after a preset period of time.
14.5 Activating/deactivating the Bluetooth function
To transfer data using Bluetooth®, you need a special Fischer Bluetooth stick. This is
included in the gauge's scope of supply. To activate Bluetooth, the function must be
activated in the gauge.
[ ]
To Next Page
Loading...
