FISCHER DELTASCOPE DMP30 - Batch Management

38
Settings for measurement DMP30 / DMP40
Creating a new batch by copying
You use the Copy function to create a batch by copying a selected batch. Apart from
the measured readings and the batch name, the batch copy contains all the settings
of the batch copy template.
► > Batches > OK >select a batch as a copy template from the list> OK > Copy
> OK > The Measurement view of the newly created batch appears in the display
 Measurement settings, see from page 38
 Assign calibration, see page 44
 Check calibration, see page 68
 Rename a batch, see page 88
7.2 Opening a batch
► > Batches > OK > select desired batch from the batch list > OK
The Measurement view of the selected batch appears in the display.
 Measure, see from page 46
 Check calibration, see page 68
7.3 Activating/deactivating specification limit monitoring
Before you start
 The batch for which you want to make the changes is open in the gauge.
To activate specification limit monitoring and set the specification
limits
1. Select the specification limits to be monitored: > Batch Modify > OK > Limits
> OK > select desired specification limit parameter > OK.
Parameter is activated:
The selected specification limit(s) with the currently set values appear in the
specification limit menu.
[ ]
[ ]
[ ]