14
Description DMP30 / DMP40
• Check Calibration
Starts the checking procedure for the selected calibration
• Lock Calibration
Locks the selected calibration, possible only with a pre-defined lock code
• Shortened course
Activates a semi-automatic calibration routine
• Reset
Deletes all coating thickness correction values from the selected calibration
• Delete
Deletes the selected calibration from the probe memory
• Info
Displays information about the selected calibration
Gauge Settings menu
Gauge Settings > Language
Selects the display language
Gauge Settings > Display Settings
Activates/deactivates display flip function and display brightness
Gauge Settings > Signal Settings
• Audible signal on/off
• Activates/deactivates the visual signals and sets the luminosity
• Vibration on/off
Gauge Settings > Data Transfer
Data transfer via Bluetooth on/off;
NOTE: A data transfer via USB and Bluetooth is possible only for evaluation pur-
poses using Tactile Suite archiving software.
Gauge Settings > Energy Savings
Activates automatic gauge shutdown and display dimming after a preset period
of time
Gauge Settings > Date & Time
Sets the date and time, and also the date and time format
Gauge Settings > More Settings
• Preset Unit
Unit of measurement, default for creating the batch
To Next Page
Loading...
