FISCHER DELTASCOPE DMP30 - Notes on Measuring; Handling the Probe

16
Description DMP30 / DMP40
dard deviation (s) relative to the mean value ( ). The coefficient of variation is a char-
acteristic process constant. A sudden change in the coefficient of variation indicates
a change in process conditions.
Min – Low. Value
Lowest measured reading in a batch or block.
Max – High. Value
Highest measured reading in a batch or block.
<LSL – n < LSL
Number of measured readings below the lower specification limit (LSL).
>USL – n < LSL
Number of measured readings above the upper specification limit (USL).
No. – Block No. (No.)
Number of the current/selected measured reading block.
x