75
DMP30 / DMP40
Calibration
Before you start
The probe is connected to the gauge containing the memory from which you
want to delete all calibrations.
To delete a ll calibrations from the memory of the connected probe
1. Call up the delete function: > Gauge Settings > OK > Probe - Menu > OK > Delete
all calibrations > OK.
2. Start the delete process: .
3. Exit the menu: , the delete process has finished.
The delete process has finished, the calibration memory of the probe is now empty.
What you should do next
Create new calibration(s), see page 66
Assign the new calibrations to the batches, page 44
[ ]
To Next Page
Loading...
