81
DMP30 / DMP40
Data transfer
3. Activate the Fischer-Bluetooth stick: > Gauge Settings > OK > Bluetooth > OK.
function is activated:
A white Bluetooth icon appears in the uppermost header to indicate that the
Fischer-Bluetooth stick is activated.
4. Exit the menu: , the settings in the gauge are now made.
5. PC: Establish the Bluetooth connection to your PC. Add the gauge (Helmut
Fischer GmbH BT Device) as a new gauge or refresh the connection.
Gauge: A blue Bluetooth icon appears in the uppermost header to indicate that
a Bluetooth connection has been established.
6. PC: Open Tactile Suite on your PC.
The gauge is automatically detected and displayed in Tactile Suite in the menu
on the left. All data from the gauge are synchronized with Tactile Suite.
The connection settings are now made.
[ ]
To Next Page
Loading...
