3
DMP30 / DMP40 Safety
ATTENTION – Damage due to high temperature
When exposed to sunshine, the areas behind glass windows (e.g. in a car) can
easily reach temperatures in excess of +50 °C (+122 °F). This can cause
damage to the gauge.
Do not keep or store the gauge and accessories behind glass panes, or near to
heat sources such as radiators etc.!
ATTENTION – No data transfer due to damaged connection and interconnec-
tion cables
Kinking or pinching of the connecting or interconnecting cable will result in line
breakage. Excessive pulling force can cause the cable to tear out of its connec-
tion. In all these cases, data transfer (measurement signal) is no longer
possible.
► Always connect an undamaged cable to the gauge. USB: max. length 3 m
(118.1 ")
► Store the cable only in coiled condition, coiling radius ≥ 20 mm (0.79 ").
► Do n ot use the probe and connection cable as a carrying aid!
ATTENTION – Wrong line voltage when charging the battery
An incorrect line voltage can lead to damage or destruction of the USB charger.
► Check the specifications for the line voltage before plugging the USB
charger into the socket. The local line voltage must match the line voltage
specified on the type plate of the USB charger.
CAUTION – when handling the battery
Improper handling of the battery can cause the battery to overheat,
leak or burst.
► Use only batteries specified by the manufacturer to operate
this gauge:
Type RRC 1130 (3.8 V, 14.47 Wh, scope of supply)
► Prevent metal objects such as necklaces, rings, etc. from
short-circuiting the contacts.
To Next Page
Loading...
