84
Batch settings DMP30 / DMP40
• Yes: Set the desired variables for your own unit of measurement:
a : Select the parameter Own Multiplier and set the multiplier related to
the unit of measurement µm.
b : Select the parameter Own Unit and assign a name for the unit of
measurement.
Change the name:
• Move cursor using the and OK keys
• Select characters using the and OK keys
• Delete characters by selecting the space ( )
Exit the dialog page Rename:
a Use the OK key to move the cursor to the far right until the character
appears at the right edge of the display.
b Exit the dialog page: OK.
3. Exit the menu: , the settings are now made.
The previous measured readings and statistical evaluations are converted and dis-
played according to the newly set unit of measurement.
To Next Page
Loading...
