Fisher FERITSCOPE FMP30 - Page 50

Operator‘s Manual FERITSCOPE
®
FMP30 Page 45
Applications
Key sequ. /
Action
Detail of the display Explanation
MENU
Selects a menu option by pressing
 or 
 Tolerance Limits ( Page 46)
 Measurement display resolution
( Page 48)
 Automatic block size and block creation
( Page 49)
 Outlier rejection ( Page 50)
 Unit, switching between the unit Fe% and
M% ( Page 52)
 Offset, entering a correction value
( Page 52)

Pressing ENTER confirms the selection.
Pressing DEL or performing a measurement
exits the MENU.
As long as the restricted operating mode is enabled (indicated by
on the display), the MENU key will not be enabled, i.e., it is not pos-
sible to modify these application-specific settings
( 10.6.1 ‘Restricted Operating Mode’, beginning on Page 166)!