Specifications for DCF
General specifications
Size …………… 127 × 127 × 127 mm (5 × 5 × 5 in.)
Weight …………… 0.34 kg (0.75 lb)
Power supply …………… 24V
Signal output …………… analog
Collision output …………… digital
Facility requirements · Environment
Relative humidity …………… up to 95% at 49°C (120°F), non-condensing
Ambient operating temperature …………… 8-52°C (45-125°F)
Airborne dust/contaminants …………… minimal
Radio frequency interference …………… minimal
Operating parameters
Compatibility …………… machines with Standard Waterjet or Dynamic Waterjet
Mixing tube …………… 4 in. length
Standoff · Standard Waterjet …………… 1.27–5.08 mm (0.05–0.20 in.)
Standoff · Dynamic Waterjet …………… 1.27–2.54 mm (0.05–0.10 in.)
Speed …………… 1778 mm/min (70 in./min) maximum
Stroke …………… 14.2 mm (0.56 in.) approximate
Material tilt …………… 4° tilt maximum, 70 mm/1000 mm (1 in./14 in.)
Underwater cutting …………… 5 mm (0.20 in.) maximum
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Dynamic Contour Follower
To Next Page
Loading...
