Recover from an error
Where used
Mach 500 · Mach 300 · Mach 200
When an error occurs during operation, a message appears in FlowCUT. To recover from an error,
follow these steps:
1. Correct the error.
2. Click OK on the message in FlowCUT.
3. In the FlowSENSE Diagnostics dialog box, click Acknowledge all, and then click Close.
4. Press the Reset button—the indicator lights will turn white.
5. Press and hold the Power button until the button illuminates green.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Get started: Operation Basics · Mach 300
To Next Page
Loading...
