Flow MACH 300 - Specifications for Mach 300

Specifications for Mach 300
Machine specifications
Z-axis travel ……………… 305 mm (12 in.)
Catcher tank load rating
1
Mild steel ……………… 1953 kg/m² (400 lb/ft²)
Stainless steel ……………… 977 kg/m² (200 lb/ft²)
Acceleration ……………… 0.075 G
Contouring speed maximum ……………… 7.5 m/min (300 in./min)
Rapid traverse maximum ……………… 12 m/min (472 in./min)
Ballbar circularity ……………… ± 0.114 mm (± 0.0045 in.)
Linear straightness accuracy ……………… ± 0.0762 mm/m (0.003 in./3 ft)
Repeatability ……………… ± 0.0635 mm (0.0025 in.)
Operating parameters
Mixing tube ……………… 4 in. length
Standoff……………… 2.54 mm (0.10 in.)
Dynamic Waterjet ……………… 10° rotation
Electrical
Power supply ……………… 3-phase
Voltage/frequency ……………… 480 VAC/60 Hz or 400 VAC/50 Hz
Main circuit breaker size
2
……………… 20 amp
1. Ratings assume a full table of slats that are in good, like-new condition.
2. For machine only; does not include the high-pressure pump.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Get started: Operation Basics · Mach 300