Install the bulk bag
Where used
ATS 2200 and ATS 4400
New parts used
ATS bulk bag ………… A-32611-1
To install the bulk bag, do the following:
1. Raise the top of the VacBOX:
a. Loosen the two door lock pivot bolts, and then rotate both bolts off the door lock tabs.
b. Turn the directional control valve on the hand pump clockwise, and then use the hand
pump to raise the lid.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Abrasive Transfer System (ATS)
To Next Page
Loading...
