Flow MACH 300 - Rotate and replace the exhaust hose

Rotate and replace the exhaust hose
Rotate the exhaust hose
Recommended maintenance interval
Daily
What to do
Rotate the exhaust hose 45°.
Replace the exhaust hose
Recommended maintenance interval
As required; replace the exhaust hose when it has worn thin or if there are any holes in it.
Parts
Tubing (hose) …………… A-18883-3.5
Tools
Sharp shears or hose cutter
To replace the exhaust hose, do the following:
1. Shut down the machine.
2. Remove the exhaust hose and discard it.
3. Cut a new exhaust hose with a pair of sharp shears or a hose cutter.
4. Connect the exhaust hose to the eductor sleeve.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: UltraPierce Vacuum Assist