Learn the machine interface · (A)
Where used
Mach 500 · Mach 300 · Mach 200
What do the indicator lights mean?
If the indicators
are...
State What does it mean?
Solid White Standby Initialization is finished, but all axes are disabled.
Flashing White +
Green
Manual The drives are enabled and you can jog the axes manually and
home the machine.
Flashing White +
Red
Set-up
Mode
The machine is in Set-up Mode.
Solid Green Automatic
cycle
A part program is running.
Solid Red Shutdown The machine is stopped due to a fault condition.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Get started: Operation Basics · Mach 300
To Next Page
Loading...