Display panel notices
The display panel's screen shows the following notices:
Notice What does it mean?
Filling Fill cycle.
Bleed Release of the pressure vessel.
Running ADS is conveying abrasive.
Silo Empty Silo is empty.
Vessel Empty. Vessel is empty.
Replace Insert of Pinch
Valve Reset P3 =>
Displays after 6000 cycles. When you see this notice, it’s time to
replace the PV1 pinch valve seal.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: PASER CF900 Abrasive Delivery System
To Next Page
Loading...
