Flow MACH 300 - PASER CF900 Abrasive Delivery System

PASER CF900 Abrasive Delivery System
PASER CF900 Abrasive Delivery System
Operation, maintenance, and troubleshooting for the CF900 hopper.
Pages: 10
• Component ID for CF900 hopper
Identifies components of the CF900.
• Specifications · CF900 hopper
Specs—including operating parameters—for the CF900 ADS.
• Using the display panel during operation
Overview of the CF900's display panel functionality and operation.
• Understand the warning indicators/audible signal
During operation, the yellow warning indicator and the audio signal identify specific
conditions pertinent to operation. Learn what to do when you see and/or hear
communications from the warning indicator and audible signal.
• Recommended pressure settings for CF900 pressure regulators
Recommended pressure settings for CF900 pressure regulators, including schematic.
• Fill, start, or shut down the hopper
How to fill, start, or shut down the ADS.
• Preventative maintenance schedule for CF900 hopper
PM schedule for the CF900 hopper.
• Replace the PV1 pinch valve seal
Replace the CF900 hopper's PV1 pinch valve seal after approximately 6000 switching
cycles. This article gives step-by-step instructions on how to replace it.
• Troubleshooting the hopper with FlowSENSE
Troubleshooting the hopper using FlowSENSE.
• Troubleshoot the CF900 hopper by symptom
Basic troubleshooting for the CF900 hopper.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: PASER CF900 Abrasive Delivery System