Troubleshooting the hopper with FlowSENSE
Reference the applicable error number/message below to find the troubleshooting steps to take.
P394 » System: Abrasive Bulk Transfer Empty Shutdown
Fill the silo with abrasive—you are out of abrasive and the ADS will remain stopped until filled.
P395 » System: Abrasive Bulk Transfer Low Warning
Abrasive level is low; fill the silo with abrasive soon.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: PASER CF900 Abrasive Delivery System
To Next Page
Loading...
