Get started: Operation Basics · Mach 300
Get Started: Operation Basics
Pages: 9
• Specifications for Mach 300
Key specifications, including operating parameters for a Mach 300 system.
• Learn the machine interface · (A)
Information on the indicator lights and buttons on the current roll-around console.
• Set-up Mode
Learn the DOs and DON'Ts and the INs and OUTs of Set-up Mode.
• Start-up inspection · (A)
The purpose of a start-up inspection is twofold: it ensures that your machine is safe to
operate, and helps your operators find small problems before they become big ones.
• Start the machine · (A)
Follow these steps to start the machine from a cold start (no power).
• Emergency stop
In an emergency, press the E-stop button on the roll-around console. This article also
includes how to reset after an E-stop.
• Shut down the machine · (A)
If you have to shut down the machine, follow these steps to do so.
• Stop or end the part program
How to stop or end the part program, including how to start or resume the part program once
you have stopped or ended it.
• Recover from an error
When an error occurs during operation, a message appears in FlowCUT. To recover from
that error, you'll want to follow these steps to get back to normal operation quickly.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Get started: Operation Basics · Mach 300
To Next Page
Loading...