Fill, start, or shut down the hopper
To fill the hopper
Remove the lid, fill the silo with abrasive, and then put the lid on.
CAUTION!
◦ Wear safety goggles to prevent eye injuries caused by pressurized abrasive leaking from the
silo.
◦ Wear a dust mask or respirator to reduce particle or dust inhalation when you fill the hopper
with abrasive.
◦ Observe proper lifting techniques when lifting abrasive bags.
◦ Avoid adding abrasive near the pressure valve muffler.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: PASER CF900 Abrasive Delivery System
To Next Page
Loading...
