• Extraction
To begin extraction from the ATS, follow these steps.
• Cross-flow separation
Follow these steps to operate in Cross-flow mode on the ATS.
• Bac-Vac separation
How to use Back-Vac mode for the ATS 4400. Also includes information on what to do if the
pump dead heads during Back-Vac operation.
• Bag dewatering
Follow these steps for bag dewatering for the ATS.
• Remove the bulk bag
To remove the bulk bag from the ATS 2200 or ATS 4400, follow these steps.
• Cleaning the pump
During cross flow separation and dewatering operations, mud flowing through the pump may
build up on the internal parts and can harden (particularly if left overnight or weekends). To
prevent the buildup of mud from interfering with the operation of the pump, clean the pump.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Abrasive Transfer System (ATS)
To Next Page
Loading...
