4. Use the applicable setting—based on model—to pump the residual mud out of the VacBOX
and back into the catcher tank or slurry pit.
ATS 2200 …………… Bag Dewatering setting
ATS 4400 …………… Back-Vac setting
Mud build up on the bottom of the cage will interfere with operating the machine in Bag
Dewatering or Back-Vac mode. Ensure the inside is rinsed clean with every bag change.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 14, 2021 PST
Ancillary option: Abrasive Transfer System (ATS)
To Next Page
Loading...
