Intended user
System operation and maintenance should be done by Flow-trained personnel. However, other
suitably trained personnel may also operate the system and do maintenance on it.
We recommend that all service work be done by Flow Service. However, other suitably trained
personnel may do service work on the system.
Work on the electrical or control system may only be done by trained, certified electricians.
Modifications
Modifications to the system, including all machine, pump, cutting head, software, and ancillary
components, is prohibited after the manufacturer distributes the system. If the system is altered
after distribution, conformity of the machine to the EC directives and standards no longer applies
and the CE mark must be removed.
We recommend the exclusive use of original replacement parts.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
To Next Page
Loading...
