FortiAnalyzer Version 3.0 MR3 Administration Guide
120 05-30003-0082-20060925
Configuring reports Reports
Figure 55: Viewing report profiles
Configuring a report profile
To enable the FortiAnalyzer unit to run a report, you need to configure the report
profile options on the focus of the report.
To configure a report profile
1 Go to Report > Config.
2 Select Create New.
3 Enter a Report Name. The report name cannot include spaces.
Create New Select to create a new report profile and configure its settings and
schedule.
# The number of report profiles on the FortiAnalyzer unit.
Report The name of the report profile.
Device(s) The device or device group included in the configured report
profile.
Schedule The scheduled frequency when the FortiAnalyzer unit generates
the report.
Action Select Delete to remove the configured report.
Select Edit to modify the report configuration.
Select Clone to create a duplicate of a report to use as a starting
point for a new report profile.
Select Go to run a report profile at any time (on demand). Select
Go when you do not have a scheduled time for the FortiAnalyzer
unit to run a report.
Delete
Edit
Clone
Run Report
To Next Page
Loading...